Manufacture of paper bags, dispersions and redispersible powders
Production Association "Welcoms+" is a reliable supplier of chemical products, one of the leaders in the market of paper bags
CHARACTERISTICS
Solid content | 98% ÷ 100% |
Ash Content | 8% ÷ 12% |
Specific gravity | 0,45 ÷ 0,55 kg/dm3 |
Appearance | White powder |
Protective colloid | Polyvinyl Alcohol |
Redispersed product minimum film forming temperature | + 5°C |
GENERAL PROPERTIES
RUVIL VP4938, mixed with cement, sand and various specific additives, casein, included, is used to obtain mortars with high bonding power and good capacity of slump. RUVIL VP4938 is in fact particularly used as self-levelling to floors where is necessary to increase the bending resistance in order to allow the movements and adhesion of lower and upper layers without cracking. RUVIL VP4938 allows a low shrinkage when motor starts the drying process in order to lower the tendency of cracking to the mortar.
RUVIL VP4938 gives to the mortar a good resistance to the abrasion.
APPLICATION
Floor self-levelling compounds
Add RUVIL VP4938, from 1% to 5%, to the other components in powder and add the necessary quantity of water taking care about the temperature which should not be high in order to avoid grits formation. After few minutes, start stirring in order to complete the dispersion and eliminate the foam as well
PACKING
RUVIL VP4938 is delivered in paper bags of 25 kg and big bags of 500 kg.
STORAGE CONDITIONS
RUVIL VP4938 must be stored in a dry and cool warehouse. Pallets must not be overlapped due do the thermoplasticity of the polymer.
Packing must be well closed after use, in order to avoid the atmospheric humidity which may cause the caking of the redispersible powder.